Ken
08-01-2010, 11:39 AM
Here's a great deal on a 3D Hobbyshop Aspera. To get a kit together like this new, it'd run between 500-700 dollars.
I'm looking to get about 300.00 for the whole deal.
You'll get the plane w/ a spektrum rx so you can Bind and fly it!
You'll also get (2) 3S1P 30C Outrage 11.1v 2200Mah packs
And, (2) Turnigy 4S1P 30-40C 14.8v 2650Mah packs
The plane runs fine with either pack, no need to change the props. You can ease into this plane with the 3S packs and when you're ready for some monster vertical pop in the 4S packs!
This plane was taken in on trade. I have flown it twice since I got it last year. Not because I don't like it, but oftentimes I didn't have room to bring it along to the field. If buyer has a 9303 I can transfer the profile over to make things go even easier.
I'm looking to get about 300.00 for the whole deal.
You'll get the plane w/ a spektrum rx so you can Bind and fly it!
You'll also get (2) 3S1P 30C Outrage 11.1v 2200Mah packs
And, (2) Turnigy 4S1P 30-40C 14.8v 2650Mah packs
The plane runs fine with either pack, no need to change the props. You can ease into this plane with the 3S packs and when you're ready for some monster vertical pop in the 4S packs!
This plane was taken in on trade. I have flown it twice since I got it last year. Not because I don't like it, but oftentimes I didn't have room to bring it along to the field. If buyer has a 9303 I can transfer the profile over to make things go even easier.