PDA

View Full Version : Curtis Solid G Gyro!

Ken
08-01-2010, 12:04 PM
Curtis Youngblood Solid G Gyro w/ Manual. 80.00
Curtis Youngblood Mini-G 100.00

G-view unit for advanced programming 30.00

Buy all for 200
BrokenRotor
08-01-2010, 12:52 PM
I am interested in it all. What are these out of and did you ever crash it?
Ken
08-01-2010, 01:02 PM
These are out of my 700 that had the YS91 in it. That 700 had never been crashed, but it did flame out over a lake causing an "emergency" auto which resulted in some broken landing gear. I've been running these unregulated since I got them and I think they work very well. I was going to move this gear into something else but my priorities have changed due to the wife being pregnant.
Ken
08-01-2010, 01:05 PM
Found some more stuff!

Never flown, only used for bench setup. Align 2 in 1 regulator w/ glow.

50 bucks.

Add 10 dollars for align 2s1p 1900mah battery.
BrokenRotor
08-01-2010, 01:07 PM
priorities have changed due to the wife being pregnant.

Do you know what caused this :doh: or :eek: or :D
BrokenRotor
08-01-2010, 01:10 PM
Found some more stuff!

Never flown, only used for bench setup. Align 2 in 1 regulator w/ glow.

50 bucks.

Does it come with the battery also?
Ken
08-01-2010, 01:15 PM
Does it come with the battery also?

I can throw in a 18c 7.4v 1900mAh align battery for another 10 bucks.
Heli Fragmentus
08-01-2010, 10:36 PM
... my priorities have changed due to the wife being pregnant.

Congratulations to the both of you, Ken :)
Ken
08-05-2010, 08:31 PM
Servos have been sold. The Gyro and the align 2 in 1 are still available. I'm open to offers on those.
Ken
08-20-2010, 05:38 PM
Gyro is all that is left. Bump for pricedrop!
Ken
08-31-2010, 04:05 PM
Added mini g and g view
BrokenRotor
08-31-2010, 04:56 PM
So what all do you have for sale right now?
Ken
08-31-2010, 05:38 PM
Check the first post.
BrokenRotor
08-31-2010, 08:46 PM
Added mini g and g view

I guess when I read this it seemed like you added something more than what was first posted. I guess I was :confused: My bad:p
mflander
09-01-2010, 09:54 AM
He's been editing the first post Steve :)
BrokenRotor
09-01-2010, 10:08 AM
Gotcha, I have not been following that close. Thanks for clearing it up Mike.