Jake
07-13-2009, 09:46 AM
In continuing my goal to sell my misc. stuff and get cash in my heli fund while it's still my fund, my Dragonus needs to go. I was going to rebuild it as a nightflyer but changed my mind. The following is cut from my rcgroups post:
Up for sale is my Dragonus N II Plus in pieces.
The Damage: It hit my roof after the jesus bolt snapped the plastic head block and separated cleanly, allowing the head to flutter down and settle in the grass. The lower frames are bent, bent boom, and bent tail shaft with one broken tail grip. The flybar w/ metal seesaw is lost somewhere in the yard, probably stolen by garden gnomes
The Good:
3xHS-65hb's
Stock motor
9650 w/ tail mount
Align carbon mains (the cheap $20 heavy ones)
All the metal upgrades except main & tail grips
Almost everything else is good including head, upper frames, gear, belt, main shaft, etc
The head block broke because I didn't dial down the headspeed after bolting on these heavy align carbons. I shouldn't have been so lazy and just mounted the metal head block.
The damage isn't that bad and if I remember right I could rebuild it for well under $50 in parts. (battery mount, landing gear skid plate, boom, tail shaft, tail grip, flybar/paddles) This was the 1st flight for all the metal and blades, and 6th flight total on the heli.
I'm asking $120 shipped for everything in the pictures and whatever else I have for it (balls, links, plastic parts incl. seesaw)
Up for sale is my Dragonus N II Plus in pieces.
The Damage: It hit my roof after the jesus bolt snapped the plastic head block and separated cleanly, allowing the head to flutter down and settle in the grass. The lower frames are bent, bent boom, and bent tail shaft with one broken tail grip. The flybar w/ metal seesaw is lost somewhere in the yard, probably stolen by garden gnomes
The Good:
3xHS-65hb's
Stock motor
9650 w/ tail mount
Align carbon mains (the cheap $20 heavy ones)
All the metal upgrades except main & tail grips
Almost everything else is good including head, upper frames, gear, belt, main shaft, etc
The head block broke because I didn't dial down the headspeed after bolting on these heavy align carbons. I shouldn't have been so lazy and just mounted the metal head block.
The damage isn't that bad and if I remember right I could rebuild it for well under $50 in parts. (battery mount, landing gear skid plate, boom, tail shaft, tail grip, flybar/paddles) This was the 1st flight for all the metal and blades, and 6th flight total on the heli.
I'm asking $120 shipped for everything in the pictures and whatever else I have for it (balls, links, plastic parts incl. seesaw)